Semi-automatic Bottle Blowing Machine
description1
Zipper closure
1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying
fabric for superior performance.
REGULAR FIT - US standard sizes. An athletic fit that sits close to the
body
for a wide range of motion, designed for optimal performance and all day
comfort.
FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them
in
place during workout
Introduction
Semi automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles. It is widely used to produce the carbonated bottle ,mineral water,carbonated drink bottle, pesticide bottle oil bottle cosmetics,wide-mouth bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
How it works
Step 1 Preheating: The preform is irradiated with an infrared high temperature lamp to heat and soften the body of the preform. The part of the preform mouth does not need to be heated. It is designed to maintain the shape of the mouth of the bottle. Therefore, it needs a cooling device to cool it.
Step 2 Bottle blowing: Take the preheated preforms out, put them in a ready-made mould, inflated with high pressure, and the preforms are blown into the required bottles.
Step 2 Bottle blowing: Take the preheated preforms out, put them in a ready-made mould, inflated with high pressure, and the preforms are blown into the required bottles.
How it works
1. Produce bottle from 0.1L to 2L(2 cavity)
2. Output capacity up to 900 for 0.5L using two-cavity blow mold
3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second
4. Equipped with special designed air storage unit
5. Using Infrared preform heater
6. Independent Temperature Control for different heating lamp to get ideal preform heating results
7. Heating lamps are adjustable in directions to suit various preforms.
8. Operated only by one person without special training.
9. Simple installation & startup adjustment.
10.Waste rate of finished bottle is less than 0.2%.
2. Output capacity up to 900 for 0.5L using two-cavity blow mold
3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second
4. Equipped with special designed air storage unit
5. Using Infrared preform heater
6. Independent Temperature Control for different heating lamp to get ideal preform heating results
7. Heating lamps are adjustable in directions to suit various preforms.
8. Operated only by one person without special training.
9. Simple installation & startup adjustment.
10.Waste rate of finished bottle is less than 0.2%.
Find the output rate match your production needs
|
Model |
RM-9A |
|
|
Container |
Product material |
PET |
|
Volume |
0.1L-2.0L |
|
|
Theoretical output |
800-1000PCS/H |
|
|
Preform length |
15mm-400mm |
|
|
Preform inner diameter |
10mm-160mm |
|
|
Moulding |
Max.mould plate Dimension(L x W) |
400x460mm |
|
Max.mould thickness |
300mm |
|
|
Clamping force |
65KN |
|
|
Mould opening stroke |
38mm |
|
|
Machine size and weight |
Main machine (L x W x H) |
175*67*186cm |
|
Main machine weight |
600Kg |
|
|
Heater (L x W x H) |
187*63*145cm |
|
|
Heater weight |
250Kg |
|
|
Power |
17.5kw |
|
Key Part You Care About The Most
Heater Part
1 - Adopt special electronic controlling circuit for heating, high efficiency in simultaneous controlling.
2 - one lamp or more, lower power consumption.
3 - The preform will be heated evenly, not be influenced by outside environment.
4- Cooling system with cold air cycle ensures same heat exposure of internal and external surface.
1 - Adopt special electronic controlling circuit for heating, high efficiency in simultaneous controlling.
2 - one lamp or more, lower power consumption.
3 - The preform will be heated evenly, not be influenced by outside environment.
4- Cooling system with cold air cycle ensures same heat exposure of internal and external surface.
Blower Part
1 - Short mould stroke,quick action.
2- Wide adaptability, suitable for every type mould thickness.
3 -Special design,high rigid compound die structure.
4 -High responsiveness pneumatic components,action timely and precisely.
5-Small size, low investment. One person enough to operate, simple and safe.
1 - Short mould stroke,quick action.
2- Wide adaptability, suitable for every type mould thickness.
3 -Special design,high rigid compound die structure.
4 -High responsiveness pneumatic components,action timely and precisely.
5-Small size, low investment. One person enough to operate, simple and safe.
Auxiliary Equipment
Flow chart of blowing machine is :
High Pressure Air Compressor -- Air Tank -- Air Filter -- Air Dryer -- Low Pressure Air Compressor -- Air Filter -- Full Automatic Blow Moulding Machine -- Mould -- Water Chiller
All these equipment are available to take.
Flow chart of blowing machine is :
High Pressure Air Compressor -- Air Tank -- Air Filter -- Air Dryer -- Low Pressure Air Compressor -- Air Filter -- Full Automatic Blow Moulding Machine -- Mould -- Water Chiller
All these equipment are available to take.
Mould and Bottle Design you need
Successful Cases in the World
-
Machine in Ghana
-
Machine in Nigeria
-
Machine in Dubai
We Focus On Customer Satisfaction
Always by your side on every step of the way to build, maintain and improve your line performance
-
Maintenance
-
24H Online Support
-
Spare Parts
Related Products
CONTACT US
Contact US
Product Information
Quantity
Unit
Piece
Support order samples, customization, wholesale direct, and complete payment. If the product you look for does not have corresponding customized content, pls fill out the form below to contact us, and we will reply ASAP.